You are not logged in.   Login  |  REGISTER  |  Help
 
    
Event Information  |    |    | 
HOMAG "KAL 310/8/E12" EDGEBANDER
Equipment Location: Jefferson City, TN
EO-230089   |  Lot # 009
Additional Photos (Click to view Larger)

For Immediate Answers Contact:
Walt Piedrahita
(877) 580-5844 ext. 379
Intl. +1 (704) 841-2001



If not available, try his/her backup:
Talice Luna ext 379
talice@exfactory.com



Current High Bid: $ 5,175   No Reserve
This Lot is being sold without a reserve.

The highest bidder will win this Lot. In the event that no bids are placed, this Lot will NOT be sold.
Next Minimum Bid: $ 5,275  
 
     
Your Bid:
(
Click or Enter Bid)
  Place Your Bid
     
Your Proxy Bid:
  Place Proxy Bid  Help
# of Bids: 30   
End Time:
Auction Closed.
Auto Refresh:   Enable Refresh Every

Event: MASONITE IV
Brand/Model: HOMAG "KAL 310/8/E12"
Year MFG: N/A
Machine Type: EDGEBANDER
Serial #: 0-200-43-1669
Elect./Voltage: 600 V, 60 Cy, 3 Ph.
Location: Jefferson City, TN
Condition: Good condition
Dimensions: 321" L  x  53" W  x  72" H
Weight: 13,700 Lbs (estimate)
Loading: Rigger Required
Comment: Sanding Unit installed in 2016 by HOMAG Technician
Buyer Premium: 15%

Description:
HOMAG KAL 310/8/A20/S2 Edgebander with Pre-Milling

Working Capacity:
0.4 - 20 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 12 - 60 mm; Feed speed variable up to 18 to 24 MPM (59' to 79' FPM).

Equipped with: Top Bottom Scoring Unit with digital indicators, Pre-Milling Unit: 2 x 3 KW, 9000 RPM, pneumatic controlled/jump milling spindles and adjustable, manual with digital indicator in-feed fence.
Pre-Heating Unit: With quartz lamps for heating the substrate to achieve optimum edgebonding.
Hot Melt Glue System "QA 34": with reversible glue roller applicator;
Edge Magazine: (6) Position Multi-purpose automatic coil/strip magazine, coils 0.3 - 3.0 mm, strips 0.4 - 20 mm
Pressure Section Type: Pressure roll section with (15) rollers, (7+8), Mounted on Rotating head with Positive stops, (1) large dia. driven Roller; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses.
HOMAG "PC 22" Powern Control System: Controller operates in Windows environment; Keypad w/LCD display, fault diagnostic, etc.; diagnostic analysis from HOMAG service support via Modem.

Workstations: End Trimming Unit: Light weight, high speed 2 x 0.5 kW - 200 Hz, (0.7 HP - 12,000 RPM each) to cut excess edge on the front & back of the panel.
Flush/Pre-Trimming Unit: Top & bottom trim station, 1.5 kW (2.0 HP - 12,000 RPM) +/- 1° angle adjustment, manual positioning with digital counters.
Profile Trimming / Fine trimming Unit": Multi function (2) motors to process the edge overhangs at the workpiece upper and lower edge.  motor each.
Universal Edge Sanding Unit: Tiltable 90°.
Profile Top Bottom Sanding Unit: with electro-pneumatic adjustment.
Adjustable outboard panel support with swing out arms for up to 800 mm. Includes Thomas Infeed and Out feed Conveyer System with 24' of Roller Conveyer. 80 mm Feed track pads; manually adjusted V-groove belt on top pressure beam and Sound/Safety enclosure over workstations. Options Include:  Thomas   return conveyor as pictured.



    Final Removal Date: 12/15/2017
      

    Note: Number of bids and bid amounts shown may vary slightly from real time.