Browse Auctions By:

And thousands more at EX-FACTORY!

DetailsTermsLoad & Ship InfoRequest More Info
Lot #: 002

Item # EO-230091  Play Video
Additional Photos (click to view larger)

Literature (click to view Larger)

Current Bid: $ 875  Reserve Not Met
Your Maximum Bid:
(Proxy Bid)
Enter $ 900 or more
(or click to autofill bid)
$ 900 $ 950
$ 1,025 $ 1,125
Increase Your Own Bid:
(Jump Bid)
# of Bids: 8   
End Time: 30 Days, 14 Hours, 54 Minutes
(1/10/2018  2:10pm EST)
Refresh:   Enable Refresh Every

Brand/Model: BRANDT "KDF-420"
Year MFG: 2009
Serial #: 0-261-66-6171
Elect./Voltage: 208/230/440/480, 60 Cy, 3 Ph
Dimensions: 130" L  x  62" W  x  65" H
Weight: 3,100 Lbs (estimate)
Loading: $ 250 Loading fee

BRANDT, KDF-420 ... Edgebander (w/Pre-Milling, Profile and Flat Scraping

 Edge & Workpiece Capacity:
0.4 - 8 mm (0.016 - 5/16") edge; 8 - 60 mm (5/16 - 2-3/8") panel thickness; 160 mm (6-3/8") min. panel length and 70 mm (2-3/4") min. panel width.

 Equipped with:

 Pre-Milling Station:
Two (2) motors @ 2.25 kW (3.0 HP), 12.000 RPM, LH & RH rotation w/pneumatic jump control for chip-free and clean panel edges. Equipped with diamond cutter heads.

 In-feed Fence:
Equipped with mechanical digital indicator for accurate positioning.

 Automatic Edge Magazine:
Combination strip & coil stock, strips 0.4 mm -8 mm (0.016 - 5/16"), coils up to 3 mm PVC and "HD" guillotine.

 Hot-Melt Gluing System:
Lower Glue Tank with quick disconnect from power and mechanical drive for ease of maintenance & glue color change.

 Pressure Section:
Large 1st. roller driven plus (2) idle rollers, timed pneumatic pressure controlled. Mechanical digital indicator for edge thickness changeover.


 End Trimming:
Precision "THK" guided with (2) Motor @ 0.35 kW (1/2 HP) 12,000 RPM, automatic chamfer from control panel 0°- 15°.

 Flush/Bevel-Fine/Radius Trimming Unit:
Top/bottom (2) motors, 0.55 kW (3/4 HP) 12,000 RPM, pneumatic auto tilt positioning 0° - 25°, with combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels, equipped with mechanical digital indicators for positioning of work-unit & horizontal copy wheels for quick changeover.

 Scraping Profile Unit:
Top/bottom with mechanical digital indicators for positioning of the insert profile knife and scrapings collection box.

 Scraping Glue Unit:
Flush top/bottom on panel surface with floating insert knives to remove potential glue residue.

 Buffing Unit:
Top/bottom (2) motors, 0.10 kW (0.125 HP) 2,800 RPM.

Operator control panel w/LCD display and soft keypad with basic programming capability.

 Complete With:
Feed Speed, fixed 14 MPM. (46 FPM). Manual positioning of hold-down pressure beam; padded sound enclosure, used tooling.

NOTE: Conducted in Canadian Dollars

Final Removal Date: 2/2/2018

General Loading & Shipping Info

Loading Types Buyer is responsible for all loading costs associated with this lot.
  1. If this item is described as "Buyer Self-Loading", you will need to bring your own labor to load or make the proper arrangements.

  2. If this item has a "Loading Fee", the fee includes loading onto your truck and does not include palletizing or any other special services.

  3. If this item is described as "Rigger Required", you will need to hire a third party Rigger to load this item or you may provide your own labor, machinery, tooling, and insurance to load it yourself (unless specified elsewhere).

  4. If this item is described as "Seller Loading", it includes (at no additional cost) loading onto your truck and does not include palletizing or any other special services.
Shipping & Freight The Buyer is responsible for all costs associated with loading & transportation and shipping preparation & loading of Ocean Freight Containers.
Pick-Up Hours Standard pick-up days and times for this item are by appointment only. Failure to request/secure an appointment may result in the delay or refusal of picking up or loading your lots. below.

This Lot Only

Loading Fee $ 250 Loading Fee

For the Buyer's convenience and insurance purposes, a loading fee is charged and includes unhooking the item, disconnecting from electric, compressed air and dust collection where applicable, and loading the item onto a truck or trailer.
Palletizing, crating, or special loading procedures are not included.

Removal: 2/2/2018 is the Final Date for Removal.


Contact the Auction Manager:   Karl Balg   (310) 619-7626 or



Note: Number of bids and bid amounts shown may vary slightly from real time.

Over 6,000 Machines
in 100 plus Categories!
Stone and Glass
The Exclusive Place to Buy and
Sell Stone & Glass Equipment!
Metalworking Machinery
Hundreds of Used & New
Industrial Machines
Zeeland Showroom
60,000 sq. ft. Warehouse
w/Showroom & Rebuild

1805 Sardis Rd. North | Charlotte, NC 28270 USA
Ph: 877-580-5844 (US / Canada) | Intl: +1 704-815-1775 | Fax: +1 704-841-1200
Copyright © 2017 EX-FACTORY INC. | All rights reserved.