Login  |  Register  |  Subscribe  |  FAQs   |  About Us  |  Contact  |  Help
 
     NEXT >
  |    | 
BIESSE "AKRON 855" EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)
Item # EO-230094  |  Lot # 002
Additional Photos (click to view larger)


Literature (click to view Larger)
 


Current Bid: $ 12,500   Reserve Met
The current Bid has reached or exceeded the Seller's Reserve price for this Lot.

The highest bidder will win this Lot.
Next Bid Increment:
 
$ 12,650    
     
Your Bid:
(
Click or Enter Bid)
  Place Your Bid
     
Max. Proxy Bid:
(Proxy Bid)

Proxy Bid:

A Proxy bid is the maximum dollar amount you are willing to bid for a specific lot. The system automatically bids up to that amount on your behalf against competing bidders (if any).

EXAMPLE: You enter a "Max Proxy Bid" amount of $500 when the lot's reserve is met and the high bid is $100.  Your Proxy Bid automatically raises your bid to the next minimum bid amount, which in this example is $125, and thus makes you the current high bidder.  When a competing bidder bids $150, the system again automatically places a next increment bid of $175 for you, making you the high bidder again.  If a competing bidder bids again, proxy bidding continues until your "Max Proxy Bid" of $500 is exceeded by a bid from a competing bidder. If your high bid is not exceeded by the end of the Auction, then you win the lot.

ADVANTAGES: Should your schedule prevent you from participating near the closing of an Auction, your "Proxy Bid" quickly bids on your behalf.  Also, when your and a competing bidder's proxy bids are of equal amount ($500 in the example) at the end of the Auction, your bid wins, because you entered your $500 "Proxy Bid" amount first.

  Place Proxy Bid
# of Bids: 37    Refresh Graphic Refresh
End Time:
1 Hour, 40 Minutes
(4/25/2018  2:10pm EST)
Refresh:   Enable Refresh Every

Brand/Model: BIESSE "AKRON 855"
Year MFG: 2007
Machine Type: EDGEBANDER (W/PRE-MILL & CORNER ROUNDING)
Serial #: 84677
Elect./Voltage: 230 V, 60 Cy, 3 Ph.
Location: HOPKINTON, MA
Dimensions: 330" L  x  59" W  x  69" H
Weight: 7,750 Lbs (estimate)
Loading: Rigger Required
Comment: A Loaded, ... Highly Automated Production Edgebander

Description:
BIESSE AKRON 855 Computer Controlled Production Edgebander

 Features & Main Specifications:
- Computer controlled interface for workstations with servos and
pneumatic positioning devices.

- Programmable selections for 1 touch change-over between edgebanding types and thicknesses.

 - Edgebanding thickness, 0.4 - 19 mm;capacity.

 - Min. panel width 85 mm & min. length 140 mm, panel thickness 10 - 50 mm.

 - Feed Speed variable from 10 - 20 MPM, 3 HP feed drive.

 Front-End Equipped With:

 Pre-Milling Unit, ... equipped with (4) positions for automatic changeover between pre-mill settings NC controlled.

 Pre-Heater, ... for panel-edge temperature control.

 Strip & Coil Edgemagazine, ... automatic with"HD" shear type guillotine.

 Top Pressure Beam, ... on-screen adjustable for height positioning.

 Hot-Melt Glue System, ... (12 min. heat up time) with teflon coated gluepot, digital thermostats with automatic kick-down when machine is in idle mode.

 Side Pressure Section, ... (1) large dia. "non-stick" coated drive roller and (5) teflon plated idle rollers with servo positioning and NC controlled material thickness adjustment.

 Workstations:

 End Trimming Unit:
Front & Rear; (0.33 HP - 12,000 RPM motors), motors travel on (2) straight slides and pneumatic tilt 0° - 15° on horizontal. plane NC controlled.

 Flush Trimming Unit:
Top & Bottom with (2 x 1.0 HP - 12,000 RPM motors), digital readouts for easy setup.

 Flush/Bevel/Radius Trimming Unit:
Multi-use top and bottom, 2-motor (0.3 HP - 12,000 RPM). Servo driven positioning motors for different edge trimming set-ups. NC controlled adjustment between profiles and positions.

 Corner Rounding Unit:
4-motor (0.3 HP - 12,000 RPM motors) for trimming leading & trailing upper & lower edge/corners with "Fast Position", and can be used as a second top & bottom fine trimmer as well.

 Profile Scraping Unit:
Top & Bottom for 2 mm or 3 mm thick PVC banding, digitals for set-up and pneumatic cylinders for quick/programmable positioning.

 Flat Scraping Unit:
Top & Bottom for potential glue glue squeeze-out and fine panel surface scraping.

 Buffing Unit:
Top & Bottom, (0.5 HP - 2,800 RPM motors), units tilt 0° - 30°.

 Hot Air Blower Unit:
Top & Bottom edge (color) reactivation station (2,000 Watt) hot air blowers with temperature adjustment.

 Complete With:

 - Programmable processor for workstations & feed speed.

 - Insulated sound enclosure over all trim stations with triple split dust hood, industrial lights and viewing windows.

 - Extendible side panel support rail.

 - 12 KVA - 240 Hz digital frequency inverters.

 FUNCTIONALITY VIDEO:
Be sure you watch the video attached with this listing. You will find it below the main picture, right hand side "Play Video"

 SHIP PREP:
Local Qualified Technician available to professionally decommission and prepare this machine for transport by Flatbed Truck, ... for cost estimate please contact the Auction Manager.

 RIGGING:
Local Rigger available, ... for cost to load on a Flatbed Truck, please contact the Auction Manager.


Final Removal Date: 5/11/2018

Contact the Auction Manager:   Karl Balg   (310) 619-7626 or Karl@exfactoryauctions.com.

  

Note: Number of bids and bid amounts shown may vary slightly from real time.