Login  |  Register  |  Subscribe  |  FAQs   |  About Us  |  Contact  |  Help
  |    | 
Item # EO-230094  |  Lot # 002
Additional Photos (click to view larger)

Literature (click to view Larger)

Current Bid: $ 12,500   Reserve Met
The current Bid has reached or exceeded the Seller's Reserve price for this Lot.

The highest bidder will win this Lot.
Next Bid Increment:
$ 12,650    
Your Bid:
Click or Enter Bid)
  Place Your Bid
Max. Proxy Bid:
(Proxy Bid)

Proxy Bid:

A Proxy bid is the maximum dollar amount you are willing to bid for a specific lot. The system automatically bids up to that amount on your behalf against competing bidders (if any).

EXAMPLE: You enter a "Max Proxy Bid" amount of $500 when the lot's reserve is met and the high bid is $100.  Your Proxy Bid automatically raises your bid to the next minimum bid amount, which in this example is $125, and thus makes you the current high bidder.  When a competing bidder bids $150, the system again automatically places a next increment bid of $175 for you, making you the high bidder again.  If a competing bidder bids again, proxy bidding continues until your "Max Proxy Bid" of $500 is exceeded by a bid from a competing bidder. If your high bid is not exceeded by the end of the Auction, then you win the lot.

ADVANTAGES: Should your schedule prevent you from participating near the closing of an Auction, your "Proxy Bid" quickly bids on your behalf.  Also, when your and a competing bidder's proxy bids are of equal amount ($500 in the example) at the end of the Auction, your bid wins, because you entered your $500 "Proxy Bid" amount first.

  Place Proxy Bid
# of Bids: 37    Refresh Graphic Refresh
End Time:
1 Hour, 57 Minutes
(4/25/2018  2:10pm EST)
Refresh:   Enable Refresh Every

Brand/Model: BIESSE "AKRON 855"
Year MFG: 2007
Serial #: 84677
Elect./Voltage: 230 V, 60 Cy, 3 Ph.
Dimensions: 330" L  x  59" W  x  69" H
Weight: 7,750 Lbs (estimate)
Loading: Rigger Required
Comment: A Loaded, ... Highly Automated Production Edgebander

BIESSE AKRON 855 Computer Controlled Production Edgebander

 Features & Main Specifications:
- Computer controlled interface for workstations with servos and
pneumatic positioning devices.

- Programmable selections for 1 touch change-over between edgebanding types and thicknesses.

 - Edgebanding thickness, 0.4 - 19 mm;capacity.

 - Min. panel width 85 mm & min. length 140 mm, panel thickness 10 - 50 mm.

 - Feed Speed variable from 10 - 20 MPM, 3 HP feed drive.

 Front-End Equipped With:

 Pre-Milling Unit, ... equipped with (4) positions for automatic changeover between pre-mill settings NC controlled.

 Pre-Heater, ... for panel-edge temperature control.

 Strip & Coil Edgemagazine, ... automatic with"HD" shear type guillotine.

 Top Pressure Beam, ... on-screen adjustable for height positioning.

 Hot-Melt Glue System, ... (12 min. heat up time) with teflon coated gluepot, digital thermostats with automatic kick-down when machine is in idle mode.

 Side Pressure Section, ... (1) large dia. "non-stick" coated drive roller and (5) teflon plated idle rollers with servo positioning and NC controlled material thickness adjustment.


 End Trimming Unit:
Front & Rear; (0.33 HP - 12,000 RPM motors), motors travel on (2) straight slides and pneumatic tilt 0° - 15° on horizontal. plane NC controlled.

 Flush Trimming Unit:
Top & Bottom with (2 x 1.0 HP - 12,000 RPM motors), digital readouts for easy setup.

 Flush/Bevel/Radius Trimming Unit:
Multi-use top and bottom, 2-motor (0.3 HP - 12,000 RPM). Servo driven positioning motors for different edge trimming set-ups. NC controlled adjustment between profiles and positions.

 Corner Rounding Unit:
4-motor (0.3 HP - 12,000 RPM motors) for trimming leading & trailing upper & lower edge/corners with "Fast Position", and can be used as a second top & bottom fine trimmer as well.

 Profile Scraping Unit:
Top & Bottom for 2 mm or 3 mm thick PVC banding, digitals for set-up and pneumatic cylinders for quick/programmable positioning.

 Flat Scraping Unit:
Top & Bottom for potential glue glue squeeze-out and fine panel surface scraping.

 Buffing Unit:
Top & Bottom, (0.5 HP - 2,800 RPM motors), units tilt 0° - 30°.

 Hot Air Blower Unit:
Top & Bottom edge (color) reactivation station (2,000 Watt) hot air blowers with temperature adjustment.

 Complete With:

 - Programmable processor for workstations & feed speed.

 - Insulated sound enclosure over all trim stations with triple split dust hood, industrial lights and viewing windows.

 - Extendible side panel support rail.

 - 12 KVA - 240 Hz digital frequency inverters.

Be sure you watch the video attached with this listing. You will find it below the main picture, right hand side "Play Video"

Local Qualified Technician available to professionally decommission and prepare this machine for transport by Flatbed Truck, ... for cost estimate please contact the Auction Manager.

Local Rigger available, ... for cost to load on a Flatbed Truck, please contact the Auction Manager.

Final Removal Date: 5/11/2018

Contact the Auction Manager:   Karl Balg   (310) 619-7626 or Karl@exfactoryauctions.com.


Note: Number of bids and bid amounts shown may vary slightly from real time.