Browse Auctions By:
Category
Manufacturer


And thousands more at EX-FACTORY!
              


DetailsTermsLoad & Ship InfoRequest More Info
 
OGDEN "16T" Milling/Rotary Planer
Lot #: 04
Print

Item # PL-230147  
Additional Photos (click to view larger)


Literature (click to view Larger)
     


Current Bid: $ 2,500  Reserve Not Met
Your Maximum Bid:
(Proxy Bid)
$  
Enter $ 2,550 or more
(or click to autofill bid)
$ 2,550 $ 2,650
$ 2,800 $ 3,000
Increase Your Own Bid:
(Jump Bid)
$  
# of Bids: 1   
End Time: 6 Days, 10 Hours, 36 Minutes
(11/28/2017  3:00pm EST)
Refresh:   Enable Refresh Every

Brand/Model: OGDEN "16T"
Year MFG: 2000
Machine Type: Milling/Rotary Planer
Serial #: 3163
Elect./Voltage: 460 V, 60 Cy, 3 Ph.
Location: Bolton, ON
Dimensions: 48" L  x  46" W  x  93" H
Weight: 4,000 Lbs (estimate)
Loading: $ 250 Loading fee
Comment:

OGDEN by LEDINEK. Model 16T Rotary Disk for Top Face Milling Planing/Calibrating of Solid & Laminated Panels.

  (1) Top Head approx. 17" diameter disk with (34) carbide insert knives (4-sided indexable rotation as they wear) mounted on the face of the perimeter; 1.6" - 15.7" (40 mm - 400 mm) width cap; 2" (50 mm) Min. part length; 0.12" - 6.5" (3 mm - 165 mm) thickness cap. with motorized adjustment and LCD readout.

  Chip Removal: 8 mm Max (1.5 mm across full width).

  Motors: 25 HP (18.5 KW) Thickness Motor; 4 HP (3 KW) Feed Motor. 0.5 HP (0.37 KW) Lift Motor.

  Speeds: 20 - 99 FPM (6 - 30 MPM) Feed Speed with Belt drive. Spindle rotation 3,600 RPM. ˜˜ Installed Power: 30 HP (22 KW); 6" dia. dust port; air pressure 90 psi (6 bar), Total weight 4,000 Lbs.

  NOTE: Advantages of Face Milling over Conventional Planing; no planer marks or snipe; higher calibrating precision at high machining speed; perfect machining of wood knots, edges or damaged areas; no deformation of cell structure, giving a smooth open pore surface. Thus results in lower glue consumption for laminating; uniform glue bond; better penetration of varnish, oil or wax.


Final Removal Date: 12/20/2017

General Loading & Shipping Info

Loading Types Buyer is responsible for all loading costs associated with this lot.
  1. If this item is described as "Buyer Self-Loading", you will need to bring your own labor to load or make the proper arrangements.

  2. If this item has a "Loading Fee", the fee includes loading onto your truck and does not include palletizing or any other special services.

  3. If this item is described as "Rigger Required", you will need to hire a third party Rigger to load this item or you may provide your own labor, machinery, tooling, and insurance to load it yourself (unless specified elsewhere).

  4. If this item is described as "Seller Loading", it includes (at no additional cost) loading onto your truck and does not include palletizing or any other special services.
 
Shipping & Freight The Buyer is responsible for all costs associated with loading & transportation and shipping preparation & loading of Ocean Freight Containers.
 
Pick-Up Hours Standard pick-up days and times for this item are by appointment only. Failure to request/secure an appointment may result in the delay or refusal of picking up or loading your lots. below.
 

This Lot Only

Loading Fee $ 250 Loading Fee

For the Buyer's convenience and insurance purposes, a loading fee is charged and includes unhooking the item, disconnecting from electric, compressed air and dust collection where applicable, and loading the item onto a truck or trailer.
Palletizing, crating, or special loading procedures are not included.

Removal: 12/20/2017 is the Final Date for Removal.


Close

Contact the Auction Manager:   Tony Cornacchione   (877) 580-5844 ext. 432 or Tony@exfactoryauctions.com.

       

  

Note: Number of bids and bid amounts shown may vary slightly from real time.


   
 
EX-FACTORY
Over 6,000 Machines
in 100 plus Categories!
Stone and Glass
The Exclusive Place to Buy and
Sell Stone & Glass Equipment!
Metalworking Machinery
Hundreds of Used & New
Industrial Machines
Zeeland Showroom
60,000 sq. ft. Warehouse
w/Showroom & Rebuild

1805 Sardis Rd. North | Charlotte, NC 28270 USA
Ph: 877-580-5844 (US / Canada) | Intl: +1 704-815-1775 | Fax: +1 704-841-1200
Copyright © 2017 EX-FACTORY INC. | All rights reserved.
customer.service@exfactoryauctions.com