Login  |  Register  |  Bidding  |  FAQs   |  About Us  |  Contact  |  Help
  |    | 
Item # RC-320006  |  Lot # 2291-00
Play Video
Additional Photos (click to view larger)

Literature (click to view Larger)

Opening Bid: $ 1,500 Reserve Not Met
The current Bid has not reached or exceeded the Seller's Reserve price for this Lot.
This Lot will not be sold until the current Bid has reached or exceeded the Seller's Reserve price for this Lot.
Next Bid Increment: $ 1,520  
Your Bid:
(Click or Enter Bid)
Max. Proxy Bid: PLACE BID
# of Bids: 0    Refresh Graphic Refresh
End Time:
13 Days, 13 Hours, 3 Minutes
(1/30/2018  1:08pm EST)
Refresh:   Enable Refresh Every

Brand/Model: KOMO "VR 510 MACH II"
Year MFG: 2001
Serial #: 36707 03 01 01
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
Location: Omaha, NE
Dimensions: 180" L  x  248" W  x  92" H
Weight: 17,250 Lbs (estimate)
Loading: Rigger Required

CNC Router!

  Fixed bridge machine with moving 5' x 10' vacuum table with single zone vacuum configuration; includes (4) edge-mounted pneumatic locating pop-up pins

  16 HP Spindle with HSK-63F adapter, programmable spindle speed and 12-Station automatic tag-along tool changer, (11) Spindle drill block consisting of 7 vertical spindles and 4 horizontal spindles, Fanuc Controller 210I-MB

  Includes Dekker VMX0552KA1-00 Vacuum Pump; 40 HP Oil-sealed liquid-ring vacuum pump; approximately 550 CFM; 10-micron inlet filter; exhaust muffler for clean quiet operation

 Equipped with: 12 HP HSk-63F Type ATC Spindle, variable spindle speed from 6000 – 24000 RPM, 10 Station tool carousel, and 1x 11 spindle boring block (7 vertical and 4 horizontal)

  All Axes: Ride on THK linear guide ways, closed-loop AC Servo motors drive precision preloaded ball screws for positioning tolerances of 0.001” & 2500 IPM rapid traverse rates. Automatic lubrication system to service all ball screw & way bearings

  Travel: X-Axis travel 134”, Y-Axis travel 84”, Z-axis travel 15”, THK precision contour linear guide ways, all positioning bearings serviced by automated lubrication system

  Control: GE/FANUC “I” Control with Windows PC front end, 10.4” high resolution color CRT, 3 axes simultaneous control, linear and circular interpolation, network compatible, RS-232 port, and hand-held controller, full Qwerty keyboard. Features: Background editing, self-diagnostics, high speed high precision machining function, canned cycles, absolute & incremental programming, inch/metric capability, cutter and tool length compensation, and feed rate and spindle speed override

 NOTE: Picture Not Actual
Machine State : Not in use, but still under Power
Inspection : Available for Inspection (By Appointment Only)

Final Removal Date: 2/14/2018

Note: Number of bids and bid amounts shown may vary slightly from real time.