Browse Auctions By:

And thousands more at EX-FACTORY!

DetailsTermsLoad & Ship InfoRequest More Info
Lot #: 2197-00

Item # RL-320006  
Additional Photos (click to view larger)

Literature (click to view Larger)

Opening Bid: $ 1,500  Reserve Not Met
Your Maximum Bid:
(Proxy Bid)
Enter $ 1,500 or more
(or click to autofill bid)
$ 1,500 $ 1,520
$ 1,550 $ 1,590
Increase Your Own Bid:
(Jump Bid)
# of Bids: 0   
End Time: Auction Closed.
Refresh:   Enable Refresh Every

Brand/Model: KOMO "INNOVA 408"
Year MFG: 1999
Serial #: 26366-03-0-99
Elect./Voltage: 480 V, 60 Cy, 3 Ph.
Location: Jefferson, SC
Dimensions: 205" L  x  123" W  x  84" H
Weight: 12,500 Lbs (estimate)
Loading: $ 0 Loading fee
Comment: This machine had its table upgraded to a 5X8. It was removed from service in NOV 2016 and has been in storage every since. It was not tested for function prior to removal. The previous owner said the

60" x 96" Moving table design in a front-to-back configuration with a single zone vacuum table machined out of 2" thick solid cast aluminum, (3) pop-up pins for material location; extra Heavy Duty fixed gantry bridge.

  Equipped with: (1) 12 HP BT-30 Type ATC routing spindle, 8-position traveling tool carousel, variable speed from 6,000 - 18,000 RPM.

  (11) spindle boring block with (7) vertical and (4) horzontial drills.

  FANUC closed loop, brushless AC Servo drive system with precision ground pre-loaded ball screws for positioning tolerances of 0.001, and 1,200 IPM max postioning feed rates on the X- & Y-axis, 600 IPM on Z-axis.

  Extended gantry bridge for full 5' x 8' table coverage, all axes ride on extra large precision contour linear guideways, all way and ball screw bearings serviced by an automatic lubrication system.

  GE/FANUC "21 I" Series computer control with high resolution CRT featuring: (3) Axes simultaneous control, RS-232 port, hand held controller, background editing, self-diagnostic, canned cycles, absolute & incremental programming, cutter compensation, tool length compensation, feed rate & spindle speed override.

 Vacuum Pump 25HP Quincy Model QSVB25ANN1E Hours: 25997 on meter S/N: 96214H
Machine State : In storage, easily accessible
Inspection : Available for Inspection (By Appointment Only)

Final Removal Date: 9/6/2017

General Loading & Shipping Info

Loading Types Buyer is responsible for all loading costs associated with this lot.
  1. If this item is described as "Buyer Self-Loading", you will need to bring your own labor to load or make the proper arrangements.

  2. If this item has a "Loading Fee", the fee includes loading onto your truck and does not include palletizing or any other special services.

  3. If this item is described as "Rigger Required", you will need to hire a third party Rigger to load this item or you may provide your own labor, machinery, tooling, and insurance to load it yourself (unless specified elsewhere).

  4. If this item is described as "Seller Loading", it includes (at no additional cost) loading onto your truck and does not include palletizing or any other special services.
Shipping & Freight The Buyer is responsible for all costs associated with loading & transportation and shipping preparation & loading of Ocean Freight Containers.
Pick-Up Hours Standard pick-up days and times for this item are by appointment only. Failure to request/secure an appointment may result in the delay or refusal of picking up or loading your lots. below.

This Lot Only

Loading Fee $ 0 Loading Fee

For the Buyer's convenience and insurance purposes, a loading fee is charged and includes unhooking the item, disconnecting from electric, compressed air and dust collection where applicable, and loading the item onto a truck or trailer.
Palletizing, crating, or special loading procedures are not included.

Removal: 9/6/2017 is the Final Date for Removal.




Note: Number of bids and bid amounts shown may vary slightly from real time.

Over 6,000 Machines
in 100 plus Categories!
Stone and Glass
The Exclusive Place to Buy and
Sell Stone & Glass Equipment!
Metalworking Machinery
Hundreds of Used & New
Industrial Machines
Zeeland Showroom
60,000 sq. ft. Warehouse
w/Showroom & Rebuild

1805 Sardis Rd. North | Charlotte, NC 28270 USA
Ph: 877-580-5844 (US / Canada) | Intl: +1 704-815-1775 | Fax: +1 704-841-1200
Copyright © 2017 EX-FACTORY INC. | All rights reserved.