Browse Auctions By:
Category
Manufacturer


And thousands more at EX-FACTORY!
              


DetailsTermsLoad & Ship InfoRequest More Info
 
ARMINIUS "SP-12" PROFILE SANDER (FEED-THRU - EDGE)
Lot #: 1371-243
Print

Item # SP-320011  
Additional Photos (click to view larger)


Literature (click to view Larger)
     


Current Bid: $ 650  Reserve Not Met
Your Maximum Bid:
(Proxy Bid)
$  
Enter $ 675 or more
(or click to autofill bid)
$ 675 $ 725
$ 800 $ 900
Increase Your Own Bid:
(Jump Bid)
$  
# of Bids: 2   
End Time: Auction Closed.
Refresh:   Enable Refresh Every

Brand/Model: ARMINIUS "SP-12"
Year MFG: 1988
Machine Type: PROFILE SANDER (FEED-THRU - EDGE)
Serial #: 2040
Elect./Voltage: 440 V, 60 Cy, 3 Ph.
Location: ZEELAND, MI
Dimensions: 172" L  x  48" W  x  44" H
Weight: 2,500 Lbs (estimate)
Loading: $ 150 Loading fee
Comment: A well cared for 1988 ARMINIUS with a great set up of (4) heads to handle many of your edge and profile sanding!

ARMINIUS - SP-12, ...Feed Through Edge Profile Sander.

4-Head Single-side conveyorized feed Edge Profile Sander for flat or profiled edges.

  1st Head: KS-10 Flat linear belt oscillating sanding head for straight edges, 2.5 HP, 4-3/4" x 82.7" abrasive belt, 24 MPS belt speed.

  2nd & 3rd Heads: Type PS33 for sanding profile's or straight edges and also permits the use of sanding discs.

  The workpiece passing through the machine activates a limit switch via a solenoid and cylinder; the limit switch controls sanding pad moving into the workpiece and retracts once the part pased the limit switch.

  2 HP Motors, 3.9" x 98-1/2" abrasive belts; belt oscillation can be set from 0 - 50 mm stroke.

  Heads tilt plus/minus approx. 60°; to sand, using a disc, the drive pulley is exchanged for a sanding disc.

  4th Head - Type Chamfer Belt Sanding Unit: The purpose of this unit is to sand milled or profiled edges or corner/edges.

  Belt size is approx 7/8" x 78 3/4", belt speed is 14.5 MPS run by a 0.55 kW (0.75 HP) motor.

  Variable feed speed conveyor from 15 - 80 FPM; upper feed holddown beam with spring loaded pressure rollers.

Machine comes with the dust collection manifold and a Profile Block Fabricating Machine; also assorted sandpaper.
Machine State : In storage, easily accessible
Inspection : Available for Inspection (By Appointment Only)


Final Removal Date: 6/7/2017

General Loading & Shipping Info

Loading Types Buyer is responsible for all loading costs associated with this lot.
  1. If this item is described as "Buyer Self-Loading", you will need to bring your own labor to load or make the proper arrangements.

  2. If this item has a "Loading Fee", the fee includes loading onto your truck and does not include palletizing or any other special services.

  3. If this item is described as "Rigger Required", you will need to hire a third party Rigger to load this item or you may provide your own labor, machinery, tooling, and insurance to load it yourself (unless specified elsewhere).

  4. If this item is described as "Seller Loading", it includes (at no additional cost) loading onto your truck and does not include palletizing or any other special services.
 
Shipping & Freight The Buyer is responsible for all costs associated with loading & transportation and shipping preparation & loading of Ocean Freight Containers.
 
Pick-Up Hours Standard pick-up days and times for this item are by appointment only. Failure to request/secure an appointment may result in the delay or refusal of picking up or loading your lots. below.
 

This Lot Only

Loading Fee $ 150 Loading Fee

For the Buyer's convenience and insurance purposes, a loading fee is charged and includes unhooking the item, disconnecting from electric, compressed air and dust collection where applicable, and loading the item onto a truck or trailer.
Palletizing, crating, or special loading procedures are not included.

Removal: 6/7/2017 is the Final Date for Removal.


Close

       

  

Note: Number of bids and bid amounts shown may vary slightly from real time.


   
 
EX-FACTORY
Over 6,000 Machines
in 100 plus Categories!
Stone and Glass
The Exclusive Place to Buy and
Sell Stone & Glass Equipment!
Metalworking Machinery
Hundreds of Used & New
Industrial Machines
Zeeland Showroom
60,000 sq. ft. Warehouse
w/Showroom & Rebuild

1805 Sardis Rd. North | Charlotte, NC 28270 USA
Ph: 877-580-5844 (US / Canada) | Intl: +1 704-815-1775 | Fax: +1 704-841-1200
Copyright © 2017 EX-FACTORY INC. | All rights reserved.
customer.service@exfactoryauctions.com