COSTA BL 1350 CROSS BRUSH/DENIBBING (4-HEAD 53")
Equipment Location: CITY OF INDUSTRY, CA
| Lot Closes: |
|
(6/6/2024 3:15 PM EST)
|
|
Event:
|
|
Trend Manor Furniture & MASHindustries
|
|
Brand/Model:
|
|
COSTA "BL 1350"
|
|
Year MFG:
|
|
2004
|
|
Machine Type:
|
|
CROSS BRUSH/DENIBBING (4-HEAD 53")
|
|
Serial #:
|
|
A 40 120 AC 2
|
|
Elect./Voltage:
|
|
480 V, 60 Cy, 3 Ph.
|
|
Location:
|
|
CITY OF INDUSTRY, CA
|
|
Condition:
|
|
New, Never Used
|
| *Dimensions: | | 160" L x 90" W x 92" H |
| *Weight: | | 0 Lbs (estimate) |
|
Loading:
|
|
Rigger Required
|
|
Comment:
|
|
Never used! Bought new for project that was cancelled!
|
|
Buyer Premium:
|
|
15%
|
Description:
(view full)
COSTA BL 1350 1,350 mm (53.15") 4-Head Denibbing Sander, with (2) Cross Brush Belts & (2) Brush Rolls
Specifications:
- Thickness cap. 1/8" - 6-1/4".
- Cross brush speeds belt 3 - 26 FPS.
- Brush roll speeds 130 - 1,300 FPM.
- Feed speeds 16 - 82 FPM.
Equipped with: - 1st & 2nd Heads: Each with 2” W Cross brush belts, 2.5 kW (3.35 HP) - 1,690 RPM Motor, Rotating belt on vertical axis supports series of pads with abrasive paper, Pads are adjustable to vary angle of contact on panel during rotation of belt, Pads with abrasive strip makes contact with workpieces from both sides as it rotates.
- (3) 2” Dia. Rubberized hold-down rolls, (1) before and after each cross brush belt head.
- 3rd & 4th Heads: Each with 62” L x 16” Dia. Brush Roll & 2.5 kW (3.35 HP) - 1,140 RPM Motor, & Horizontal angle adjustment.
- 2-5/8” dia x 7/8” w swivel rubber wheels before each brush roll head.
- (1) 2” Dia. Rubberized hold-down roll after last brush roll head.
- 53-1/2” W x 12’ L Vacuum feed belt, with 2.64 kW (3-1/2 HP) - 1,695 RPM Motor, Holes on 1-1/2” W & 2” L Centers, 2-1/2” Dia. Rubber-covered infeed & outfeed rolls, Motorized adjustment with Digital readout with LED Display.
- Control motor load meters.
Complete with: - Instruction Manual.
|
COSTA BL 1350 1,350 mm (53.15") 4-Head Denibbing Sander, with (2) Cross Brush Belts & (2) Brush Rolls
Specifications:
- Thickness cap. 1/8" - 6-1/4".
- Cross brush speeds belt 3 - 26 FPS.
- Brush roll speeds 130 - 1,300 FPM.
- Feed speeds 16 - 82 FPM.
Equipped with: - 1st & 2nd Heads: Each with 2” W Cross brush belts, 2.5 kW (3.35 HP) - 1,690 RPM Motor, Rotating belt on vertical axis supports series of pads with abrasive paper, Pads are adjustable to vary angle of contact on panel during rotation of belt, Pads with abrasive strip makes contact with workpieces from both sides as it rotates.
- (3) 2” Dia. Rubberized hold-down rolls, (1) before and after each cross brush belt head.
- 3rd & 4th Heads: Each with 62” L x 16” Dia. Brush Roll & 2.5 kW (3.35 HP) - 1,140 RPM Motor, & Horizontal angle adjustment.
- 2-5/8” dia x 7/8” w swivel rubber wheels before each brush roll head.
- (1) 2” Dia. Rubberized hold-down roll after last brush roll head.
- 53-1/2” W x 12’ L Vacuum feed belt, with 2.64 kW (3-1/2 HP) - 1,695 RPM Motor, Holes on 1-1/2” W & 2” L Centers, 2-1/2” Dia. Rubber-covered infeed & outfeed rolls, Motorized adjustment with Digital readout with LED Display.
- Control motor load meters.
Complete with: - Instruction Manual.
