Description:
(view full)
Edgebander with Pre-Mill
- NOTE: Corner Rounding, Buffing, & Blowing Units are not functional
- Edge & Workpiece Capacity: 0.4 - 15 mm (0.016" - 0.59") Edge thickness, 14 - 65 mm (0.55" - 2.56") Edge height, 10 - 60 mm (0.39" - 2.36") Panel thickness, 140 mm (5.50") Minimum panel length, 85 mm (3.30") Minimum panel width
- Machine hours (Please see photo)
INFEED SECTION:
- Pre-Milling Unit, "FI-701": Rectifies face to be edged before applying glue, Horizontal & vertical movement of (2) motors on linear guides, Independent automatic temporized intervention of (2) 1.8 kW (2-1/2 HP) 12,000 RPM Motors, Independent copying pads on each unit, Auto-set device to ensure optimum positioning of cutters according to thickness of panel being machined
- Edge Feeding, Gluing & Pressing Unit: With Automatic edge magazine for strip & coil stock, 3 mm (0.04") PVC Guillotine, Includes: Pre-Melt ,"QM-701", For quick heating & tank changing with Floating & bidirectional glue roller applicator
- Pressure Section: (1) Large driven & (5) Idle rollers, Independent pneumatic pressure control, Programmable servo motor for quick edge thickness changeover, Feed speeds 10, 14 & 20 MPM (33, 46 & 65 FPM)
WORKSTATIONS:
- End (Edge) Trimming Unit, "IN-701-V": (2) .35 kW (1/2 HP) 12,000 RPM Motors, Automatic 4-position programmable chamfer from control panel (0°, 3.6°, 11°, 15°), Sliding in slicing motion on 45° precision guide bar with Oversized bearing blocks
- Superimposed Flush (Double Edge) Trimming Unit, "RS-701": Top & bottom, (2) 0.8 kW (1 HP) 12,000 RPM Motors with Superimposed motor position, 1° Tilt capability
- Tilting Top & Bottom Trimming Unit, "RI-701": (2) 0.65 kW (.87 HP) 12,000 RPM Motors, For radius top & bottom fine trimming, Unit can be tilted 0° - 45°
- Corner Rounding Unit, "CR-200V": For corner rounding, top & bottom trimming on panel edge with synthetic material & wood edgebanding up to 5 mm (.20") Maximum edge thickness
- Edge Scraping Unit, "RB-701": For finishing rounded off edges in PVC or ABS up to 5 mm (0.20") thickness
- Flat (Glue) Scraper: Top & Bottom, Removes potential excess glue before buffing unit
- Buffing Unit, "SPL-700": Top & bottom
- Hot Air Blower Unit, "PH-700": (2) STEINEL 2,000 W, Reactivates color of thick plastic
Includes:
- PC-based control panel with 15" Color LCD monitor, HF (High Frequency) motors on all cutting & trimming workstations
- Top pressure beam programmable via positioning motor, Top pressure provided by belt hold-down
- 36" Diameter Coil table, Padded sound enclosure
|