HOLZMA HPP 250/32/32 FRONT LOAD, AUTO. PANEL SAW
Equipment Location: TUSCON, AZ
| Lot Closes: |
|
(1/18/2022 3:39 PM EST)
|
|
Event:
|
|
Minneapolis & Tucson Caseworx
|
|
Brand/Model:
|
|
HOLZMA "HPP 250/32/32"
|
|
Year MFG:
|
|
2005
|
|
Machine Type:
|
|
FRONT LOAD, AUTO. PANEL SAW
|
|
Serial #:
|
|
0-341-07-6998
|
|
Elect./Voltage:
|
|
230 V, 60 Cy, 3 Ph.
|
|
Location:
|
|
TUSCON, AZ
|
|
Condition:
|
|
Good condition
|
| *Dimensions: | | 244" L x 234" W x 72" H |
| *Weight: | | 9,300 Lbs (estimate) |
|
Loading:
|
|
Rigger Required
|
|
Comment:
|
|
Compact & fast for small batch sizes!
|
|
Buyer Premium:
|
|
15%
|
Description:
(view full)
10' Front Load Automatic Panel Saw NOTE: Scissor lift not included & Machine hours not available 3,100 mm (122.05") Cutting length & Pull-back, 75 mm (2.95") Saw blade projection Main Blade: 350 mm (13.78") Diameter, 75 mm (2.95") Bore, 7.5 kW (10 HP) Motor Scoring Blade: 200 mm (7.87") Diameter, 45 mm (1.77") Bore, 1.1 kW (1-1/2 HP) Motor, NC-controlled adjustment Saw Carriage: Variable feed speeds 5 - 100 MPM (16 - 328 FPM), Constant return speed 80 MPM (262 FPM) Fence: Electronically-controlled overhead program fence with Rack & pinion driven on both sides, Forward speeds 0 - 60 MPM (0 - 196 FPM), (6) Pneumatic gripper clamps, (3) with (2) Fingers & (3) with (1) Finger, Clamp capacity 76 mm (2.99") Control: PC Front-End with HOLZMA "CADMATIC 3" Power Control + "WINDOWS XP" Operating system, 15" Flat screen monitor, DVD Drive, RS-232 Port, USB Port, Analog modem "Real-Time" Cutting sequences with 2D Moving graphics, High-tech error diagnostics with True photos & Video clips for immediate identification of source problem Automatic "CENTRIC" full cutting length side pressure device with Front & Rear forks holding ripped strips squarely against 73" L x 3-1/2" H right angle fence "POWER-LOC" Quick-change saw blade system, (3) 22" x 71-1/2" x 39" H Front Air flotation tables Includes: Manuals & Electronic Media
|
10' Front Load Automatic Panel Saw NOTE: Scissor lift not included & Machine hours not available 3,100 mm (122.05") Cutting length & Pull-back, 75 mm (2.95") Saw blade projection Main Blade: 350 mm (13.78") Diameter, 75 mm (2.95") Bore, 7.5 kW (10 HP) Motor Scoring Blade: 200 mm (7.87") Diameter, 45 mm (1.77") Bore, 1.1 kW (1-1/2 HP) Motor, NC-controlled adjustment Saw Carriage: Variable feed speeds 5 - 100 MPM (16 - 328 FPM), Constant return speed 80 MPM (262 FPM) Fence: Electronically-controlled overhead program fence with Rack & pinion driven on both sides, Forward speeds 0 - 60 MPM (0 - 196 FPM), (6) Pneumatic gripper clamps, (3) with (2) Fingers & (3) with (1) Finger, Clamp capacity 76 mm (2.99") Control: PC Front-End with HOLZMA "CADMATIC 3" Power Control + "WINDOWS XP" Operating system, 15" Flat screen monitor, DVD Drive, RS-232 Port, USB Port, Analog modem "Real-Time" Cutting sequences with 2D Moving graphics, High-tech error diagnostics with True photos & Video clips for immediate identification of source problem Automatic "CENTRIC" full cutting length side pressure device with Front & Rear forks holding ripped strips squarely against 73" L x 3-1/2" H right angle fence "POWER-LOC" Quick-change saw blade system, (3) 22" x 71-1/2" x 39" H Front Air flotation tables Includes: Manuals & Electronic Media
