HOLZ-HER 1302 UNO EDGEBANDER (COMPACT)
Equipment Location: COKER, AL
| Lot Closes: |
|
(6/27/2024 3:10 PM EST)
|
|
Event:
|
|
Cabinetmaking & Millwork Equipment
|
|
Brand/Model:
|
|
HOLZ-HER "1302 UNO"
|
|
Year MFG:
|
|
2007
|
|
Machine Type:
|
|
EDGEBANDER (COMPACT)
|
|
Serial #:
|
|
562/0-706 5008739
|
|
Elect./Voltage:
|
|
220 V, 60 Cy, 1 Ph
|
|
Location:
|
|
COKER, AL
|
|
Condition:
|
|
Very good condition
|
| *Dimensions: | | 120" L x 36" W x 51" H |
| *Weight: | | 2,100 Lbs (estimate) |
|
Loading:
|
|
Seller Loading
|
|
Comment:
|
|
Single Phase!
|
|
Buyer Premium:
|
|
15%
|
Description:
(view full)
HOLZ-HER 1302 UNO Compact Edgebander
Specifications:
- Edgebanding thickness: 0.4 - 3 mm (0.02" - 0.12"), Edgebanding width 50 mm (1.97"), Min. strip length 350 mm (13.78").
- Panel thickness 6 - 45 mm (0.24" - 1.77"), Min. panel width 65 mm (2.56"), Min. panel length 250 mm (9.84").
- Feed speed 10 MPM (32 FPM).
Equipped with: - "1806-1" Semi-automatic coil & strip magazine.
- "1906M" Cartridge glue system, with 2 - 3 Min. Heat-up time.
- Pneumatically-operated guillotine.
- "1912" Pressure section, with (1) Large electronically-controlled & feed speed synchronized driven & (1) Small idler roll.
- Telescoping outboard support.
- Safety enclosure.
- PLC Control, with LED Displays.
Workstations: - "1822" Front & Rear End Trim Unit, with 0.22 kW (1/3 HP) - 9000 RPM - 300 Hz Motor, Pneumatic changeover system, & 0° - 10° Bevel.
- "1825" Top & Bottom Flush/Chamfer/Radius Trim Unit, with (2) 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motors, Horizontal tracing, & 0° - 15° Chamfer.
- "1940" Top & Bottom Buffing Unit, with 1/3 HP - 1,440 RPM Motor, 0° - 5° Vertical tilt, & 0° - 20° Horizontal swivel.
NOTE: Above specs are taken from literature and considered accurate. As always, please take advantage of inspection period to verify.
|
HOLZ-HER 1302 UNO Compact Edgebander
Specifications:
- Edgebanding thickness: 0.4 - 3 mm (0.02" - 0.12"), Edgebanding width 50 mm (1.97"), Min. strip length 350 mm (13.78").
- Panel thickness 6 - 45 mm (0.24" - 1.77"), Min. panel width 65 mm (2.56"), Min. panel length 250 mm (9.84").
- Feed speed 10 MPM (32 FPM).
Equipped with: - "1806-1" Semi-automatic coil & strip magazine.
- "1906M" Cartridge glue system, with 2 - 3 Min. Heat-up time.
- Pneumatically-operated guillotine.
- "1912" Pressure section, with (1) Large electronically-controlled & feed speed synchronized driven & (1) Small idler roll.
- Telescoping outboard support.
- Safety enclosure.
- PLC Control, with LED Displays.
Workstations: - "1822" Front & Rear End Trim Unit, with 0.22 kW (1/3 HP) - 9000 RPM - 300 Hz Motor, Pneumatic changeover system, & 0° - 10° Bevel.
- "1825" Top & Bottom Flush/Chamfer/Radius Trim Unit, with (2) 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motors, Horizontal tracing, & 0° - 15° Chamfer.
- "1940" Top & Bottom Buffing Unit, with 1/3 HP - 1,440 RPM Motor, 0° - 5° Vertical tilt, & 0° - 20° Horizontal swivel.
NOTE: Above specs are taken from literature and considered accurate. As always, please take advantage of inspection period to verify.
