HOLZ-HER 1434 EDGEBANDER
Equipment Location: MARYSVILLE, MI
| Lot Closes: |
|
(2/27/2025 2:20 PM EST)
|
|
Event:
|
|
Tim's Custom Woodshop
|
|
Brand/Model:
|
|
HOLZ-HER "1434"
|
|
Year MFG:
|
|
1994
|
|
Machine Type:
|
|
EDGEBANDER
|
|
Serial #:
|
|
4256
|
|
Elect./Voltage:
|
|
N/A
|
|
Location:
|
|
MARYSVILLE, MI
|
|
Condition:
|
|
Very good condition
|
| *Dimensions: | | 158" L x 44" W x 64" H |
| *Weight: | | 1,430 Lbs (estimate) |
|
Loading:
|
|
Seller Loading
|
|
Comment:
|
|
Complete with cartridge glue system!
|
|
Buyer Premium:
|
|
15%
|
Description:
(view full)
HOLZ-HER 1434 EXPRESS Edgebander
NOTE: Seller states that Front & Rear End Trim Unit does not work properly.
Specifications:
- Edgebanding thickness 0.3 - 5 mm (0.01" - 0.20"), Max. edgebanding height 51 mm (2.01"), Min. edgebanding length 200 mm (7.87") & 350 mm (13.78") with Automatic feed.
- Panel thickness 6 - 45 mm (0.24" - 1.77"), Min. panel width 60 mm (2.36"), & Min. panel length 180 mm (7.09").
- Feed speed 11 MPM (36 FPM).
Equipped with: - 23-1/4" Dia. Coil table.
- Cartridge glue system.
- Automatic feed magazine.
- Guillotine.
- Pressure section, with (1) Large driven & (2) Small idler rollers.
- Feed chain, with 2-3/4” W Rubber pads & 0.75 kW (1 HP) Motor.
- Top pressure beam.
- Outboard panel support.
- Safety enclosure.
- Control, with LED displays.
Workstations: - Front & Rear End Trim Unit, with (2) 0.6 kW (0.8 HP) - 28,000 RPM Motors.
- Top & Bottom Flush Trim Unit, with (2) 0.6 kW (0.8 HP) - 28,000 RPM Motors and Horizontal & Vertical copy feelers.
- Top & Bottom Buffing Unit with (2) 0.12 kW (0.16 HP) Motors .
Complete with: - Instructions.
Dimensions: 158" x 44" x 64" H.
Dimensions with Outboard Panel Support Extended: 158” x 64” x 64 H.
|
HOLZ-HER 1434 EXPRESS Edgebander
NOTE: Seller states that Front & Rear End Trim Unit does not work properly.
Specifications:
- Edgebanding thickness 0.3 - 5 mm (0.01" - 0.20"), Max. edgebanding height 51 mm (2.01"), Min. edgebanding length 200 mm (7.87") & 350 mm (13.78") with Automatic feed.
- Panel thickness 6 - 45 mm (0.24" - 1.77"), Min. panel width 60 mm (2.36"), & Min. panel length 180 mm (7.09").
- Feed speed 11 MPM (36 FPM).
Equipped with: - 23-1/4" Dia. Coil table.
- Cartridge glue system.
- Automatic feed magazine.
- Guillotine.
- Pressure section, with (1) Large driven & (2) Small idler rollers.
- Feed chain, with 2-3/4” W Rubber pads & 0.75 kW (1 HP) Motor.
- Top pressure beam.
- Outboard panel support.
- Safety enclosure.
- Control, with LED displays.
Workstations: - Front & Rear End Trim Unit, with (2) 0.6 kW (0.8 HP) - 28,000 RPM Motors.
- Top & Bottom Flush Trim Unit, with (2) 0.6 kW (0.8 HP) - 28,000 RPM Motors and Horizontal & Vertical copy feelers.
- Top & Bottom Buffing Unit with (2) 0.12 kW (0.16 HP) Motors .
Complete with: - Instructions.
Dimensions: 158" x 44" x 64" H.
Dimensions with Outboard Panel Support Extended: 158” x 64” x 64 H.
