SCMI MINI-MAX ME 25 EDGEBANDEDR, SINGLE SIDED SINGLE PHASE
0.4 mm to 3 mm (1/8") Max. edge thickness cap. and 1.96" max. panel thickness; semi-automatic strip & coil feed magazine (feeds coil material automatically and strips one at the time); Teflon coated glue pot w/fast (8-10) Minute heat-up time, 1.2 mm cap. guillotine.
Workstations:
"ME 25" 2-Head
Single motor end trim (0.8 HP - 12,000 RPM motor)
Top & bottom flush trims (0.8 HP - 12,000 RPM ea. motor), straight or bevel cutters.
Top & bottom scraping station.
Top & bottom buffing, 3,000 RPM motors. 22 FPM Fixed feed speed with 0.8 HP drive.
Complete with: Sound enclosure, outrigger panel support, frequency converter, and used tooling on the stations.
Features:
Control Panel on machine infeed side
Machine frame made of high rigidity ribbed steel to guarantee excellent support
Top thick steel pressure beam with rubber coated wheel
Manual adjustment of top beam with Auto positioning of operating units
Numeric indicator of selected panel thickness
Glue smoke-specific exhaust outlet; centralized extraction of the dust
Panel support roller which can be extended the entire length of the machine
NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
SCMI MINI-MAX ME 25 EDGEBANDEDR, SINGLE SIDED SINGLE PHASE
0.4 mm to 3 mm (1/8") Max. edge thickness cap. and 1.96" max. panel thickness; semi-automatic strip & coil feed magazine (feeds coil material automatically and strips one at the time); Teflon coated glue pot w/fast (8-10) Minute heat-up time, 1.2 mm cap. guillotine.
Workstations:
"ME 25" 2-Head
Single motor end trim (0.8 HP - 12,000 RPM motor)
Top & bottom flush trims (0.8 HP - 12,000 RPM ea. motor), straight or bevel cutters.
Top & bottom scraping station.
Top & bottom buffing, 3,000 RPM motors. 22 FPM Fixed feed speed with 0.8 HP drive.
Complete with: Sound enclosure, outrigger panel support, frequency converter, and used tooling on the stations.
Features:
Control Panel on machine infeed side
Machine frame made of high rigidity ribbed steel to guarantee excellent support
Top thick steel pressure beam with rubber coated wheel
Manual adjustment of top beam with Auto positioning of operating units
Numeric indicator of selected panel thickness
Glue smoke-specific exhaust outlet; centralized extraction of the dust
Panel support roller which can be extended the entire length of the machine
NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.