M.S.K. OMRM 136 CORNER CRIMPING MACHINE
Equipment Location: ANDERSON, SC
| Lot Closes: |
|
16 Day(s) 14 Hour(s) 44 Min 43 Sec
(4/3/2025 3:15 PM EST)
|
|
Event:
|
|
Elevated Corp.
|
|
Brand/Model:
|
|
M.S.K. "OMRM 136"
|
|
Year MFG:
|
|
2021
|
|
Machine Type:
|
|
CORNER CRIMPING MACHINE
|
|
Serial #:
|
|
21CCM360047
|
|
Elect./Voltage:
|
|
208 V, 60 Cy, 3 Ph.
|
|
Location:
|
|
ANDERSON, SC
|
|
Condition:
|
|
Good condition
|
| *Dimensions: | | 40" L x 40" W x 54" H |
| *Weight: | | 706 Lbs (estimate) |
|
Loading:
|
|
Seller Loading
|
|
Comment:
|
|
|
|
Buyer Premium:
|
|
15%
|
Description:
(view full)
M.S.K. Omrm 136 Corner Crimping Machine
Joining the corners of two aluminum profiles with a wedge placed inside by applying pressure.
Specifications:
- (2) universal heads supplied with knives adjustable in 3 axes
- (3) vertical pneumatic clamps ensure correct positioning and gripping of the profiles in the machine
- Air pressure : 6-8 Bar, Hydraulic Printing : 100-120 Bar
- Pressing Power : 3,250 kgf
- Minimum Profile Height : 2.36" (60 mm), Maximum Profile Height : 5.51" (140 mm), Maximum Profile Width : 5.51" (140 mm)
Features:
- Pneumatic crimping via lever system ensures synchronous movement of the punching heads
- Universal hydropneumatic drop-away stop for easier handling of the frames
- Horizontal and drop-away wedge-shaped clamp ensures correct alignment and gripping of the profiles which are mated during
the crimping phases
- Crimping head with knife kit ensures fine position adjustment; it features a quick clamping / unclamping system and is fully
adaptable to any series of workable profiles
- Alignment of frame with side stops
- Hydropneumatic locking of the stop
- (2) pairs of standard crimping knives 4/6 mm
- Supporting arms for profiles (right & left)
NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
|
M.S.K. Omrm 136 Corner Crimping Machine
Joining the corners of two aluminum profiles with a wedge placed inside by applying pressure.
Specifications:
- (2) universal heads supplied with knives adjustable in 3 axes
- (3) vertical pneumatic clamps ensure correct positioning and gripping of the profiles in the machine
- Air pressure : 6-8 Bar, Hydraulic Printing : 100-120 Bar
- Pressing Power : 3,250 kgf
- Minimum Profile Height : 2.36" (60 mm), Maximum Profile Height : 5.51" (140 mm), Maximum Profile Width : 5.51" (140 mm)
Features:
- Pneumatic crimping via lever system ensures synchronous movement of the punching heads
- Universal hydropneumatic drop-away stop for easier handling of the frames
- Horizontal and drop-away wedge-shaped clamp ensures correct alignment and gripping of the profiles which are mated during
the crimping phases
- Crimping head with knife kit ensures fine position adjustment; it features a quick clamping / unclamping system and is fully
adaptable to any series of workable profiles
- Alignment of frame with side stops
- Hydropneumatic locking of the stop
- (2) pairs of standard crimping knives 4/6 mm
- Supporting arms for profiles (right & left)
NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
