ITALPRESSE LOCK-FORM Membrane Press, with Custom Designed Electrically-Heated Platens Designed to Last 10X Longer Than OEM Platens
LOADING FEE: CAD 800 payable directly to Seller's Rigger.
NOTE: Exterior panels are currently removed from press, but available.
Specifications:
Designed for lamination of pre-shaped & glued panels with PVC & polypropylene films with-or-without use of membrane. Working without membrane allows for forming film into deep & vertical sided profiles, very small profiles like vein lines, and lipped profiles which are not possible using membrane. It permits higher working temperatures required for laminating environmentally preferred polypropylene films and saves expense of regularly replacing damaged/worn membranes.
Platen size: 54" x 108".
Max. daylight opening 8".
Max. workpiece thickness 2-1/8".
Max. platen temperature 130° C (266° F).
Specific pressure 100 PSI.
Cycle time without membrane 1-1/2 - 2 Min. (Depending on film thickness).
Equipped with:
Electrically-heated platens are custom built with thick aluminum plate, cross-drilled for balanced temperature distribution, with very long-life heating rods, capable of high temperature and extremely durable.
Upper platen moves into closed position and locks into place without use of hydraulic press cylinders.
Vacuum system, with High cap. accumulator tank for very rapid draw-down of film over shaped panels.
Complete with:
600/208Y/120 V Step-Down Transformer.
Press Dimensions: 236 x 98" x 109" H. Control Dimensions: 41" x 19" x 73" H.
CURRENCY NOTE: Bidding conducted in Canadian Dollars.
ITALPRESSE LOCK-FORM Membrane Press, with Custom Designed Electrically-Heated Platens Designed to Last 10X Longer Than OEM Platens
LOADING FEE: CAD 800 payable directly to Seller's Rigger.
NOTE: Exterior panels are currently removed from press, but available.
Specifications:
Designed for lamination of pre-shaped & glued panels with PVC & polypropylene films with-or-without use of membrane. Working without membrane allows for forming film into deep & vertical sided profiles, very small profiles like vein lines, and lipped profiles which are not possible using membrane. It permits higher working temperatures required for laminating environmentally preferred polypropylene films and saves expense of regularly replacing damaged/worn membranes.
Platen size: 54" x 108".
Max. daylight opening 8".
Max. workpiece thickness 2-1/8".
Max. platen temperature 130° C (266° F).
Specific pressure 100 PSI.
Cycle time without membrane 1-1/2 - 2 Min. (Depending on film thickness).
Equipped with:
Electrically-heated platens are custom built with thick aluminum plate, cross-drilled for balanced temperature distribution, with very long-life heating rods, capable of high temperature and extremely durable.
Upper platen moves into closed position and locks into place without use of hydraulic press cylinders.
Vacuum system, with High cap. accumulator tank for very rapid draw-down of film over shaped panels.
Complete with:
600/208Y/120 V Step-Down Transformer.
Press Dimensions: 236 x 98" x 109" H. Control Dimensions: 41" x 19" x 73" H.
CURRENCY NOTE: Bidding conducted in Canadian Dollars.