UNIQUE 310 AUTOMATIC SHAPER (COPE)
Equipment Location: PHOENIX, AZ
| Lot Closes: |
|
(3/25/2025 2:40 PM EST)
|
|
Event:
|
|
Forest Designs Furniture
|
|
Brand/Model:
|
|
UNIQUE "310"
|
|
Year MFG:
|
|
N/A
|
|
Machine Type:
|
|
AUTOMATIC SHAPER (COPE)
|
|
Serial #:
|
|
020499168
|
|
Elect./Voltage:
|
|
220 V, 60 Cy, 3 Ph.
|
|
Location:
|
|
PHOENIX, AZ
|
|
Condition:
|
|
Good condition
|
| *Dimensions: | | 0" L x 0" W x 0" H |
| *Weight: | | 0 Lbs (estimate) |
|
Loading:
|
|
Seller Loading
|
|
Comment:
|
|
|
|
Buyer Premium:
|
|
15%
|
Description:
(view full)
UNIQUE 310 Double-Sided End Cope Shaper
Copes multiple workpieces up to 5" wide x 24" long in only (1) pass, quickly and accurately on both ends.
- Equipped with: (2) 5 HP motors with magnetic starter, 1-1/4" dia. shaper spindles with counter-rotating cutter-heads eliminate tear-out on detail edge of cope/tenon cuts; pneumatic safety clamps hold work in place until sliding table is returned to its forward position.
- Complete with: Automatic lock on sliding table, separate backboards, dust hoods, and foot pedal controls
- Includes: Emergency stop, disconnect and lockout features
- Utilities: Compressed air requirements: 100 PSI, 1 CFM; Dust collection: 1,200 CFM per spindle; Machine weight: 600 Lbs.
NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
|
UNIQUE 310 Double-Sided End Cope Shaper
Copes multiple workpieces up to 5" wide x 24" long in only (1) pass, quickly and accurately on both ends.
- Equipped with: (2) 5 HP motors with magnetic starter, 1-1/4" dia. shaper spindles with counter-rotating cutter-heads eliminate tear-out on detail edge of cope/tenon cuts; pneumatic safety clamps hold work in place until sliding table is returned to its forward position.
- Complete with: Automatic lock on sliding table, separate backboards, dust hoods, and foot pedal controls
- Includes: Emergency stop, disconnect and lockout features
- Utilities: Compressed air requirements: 100 PSI, 1 CFM; Dust collection: 1,200 CFM per spindle; Machine weight: 600 Lbs.
NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
