Cutting capacity at 90° is 2" x 7-3/4" and at 45° is 2-1/2" x 5-3/8"; capable of cutting compound angles
(2) 2 HP saw motors; 5/8" dia. saw arbors
12" diameter blade capacity; right saw is moveable up to 8' between centers on rack and pinion
Saws miter toward each other with positive stops at 90° and 45°
Pneumatically actuated; (2) center work supports with (2) vertical air clamps
NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
C T D 200 Double End Trim & Miter Saw
Cutting capacity at 90° is 2" x 7-3/4" and at 45° is 2-1/2" x 5-3/8"; capable of cutting compound angles
(2) 2 HP saw motors; 5/8" dia. saw arbors
12" diameter blade capacity; right saw is moveable up to 8' between centers on rack and pinion
Saws miter toward each other with positive stops at 90° and 45°
Pneumatically actuated; (2) center work supports with (2) vertical air clamps
NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.