BIESSE AKRON 245 EDGEBANDER (W/CORNER ROUNDING)
Equipment Location: ANDERSON, SC
| Lot Closes: |
|
(4/3/2025 3:05 PM EST)
|
|
Event:
|
|
Elevated Corp.
|
|
Brand/Model:
|
|
BIESSE "AKRON 245"
|
|
Year MFG:
|
|
2003
|
|
Machine Type:
|
|
EDGEBANDER (W/CORNER ROUNDING)
|
|
Serial #:
|
|
|
|
Elect./Voltage:
|
|
600 V, 60 Cy, 3 Ph.
|
|
Location:
|
|
ANDERSON, SC
|
|
Condition:
|
|
Good condition
|
| *Dimensions: | | 190" L x 45" W x 67" H |
| *Weight: | | 3,750 Lbs (estimate) |
|
Loading:
|
|
Rigger Required
|
|
Comment:
|
|
NO RESERVE!
|
|
Buyer Premium:
|
|
15%
|
Description:
(view full)
BIESSE AKRON 245 Edgebander with Corner Rounding
Left-hand material infeed for strips & coiled edge material like PVC, ABS, veneer, and solid wood.
Specifications:
- 0.4 - 8 mm (5/16") Cap. edgebanding thickness, min. panel width 85 mm & min. length 140 mm, panel thickness 10 - 50 mm.
Equipped with: - Adjustable top-pressure beam positioning.
- Automatic strip & coil feed magazine with robust shear type 3 mm PVC guillotine.
- Hot-Melt glue system (12 min. heat up time) with Teflon coated gluepot, digital thermostats with automatic kick-down when machine is in idle mode; 1" dia. glue applicator roller.
- Pressure section with (1) large dia. "non-stick" coated drive roller & (2) chrome plated idle rollers with pneumatic positioning.
Workstations: - Front & Rear End Trims (0.33 HP - 12,000 RPM motors), motors travel on (2) straight slides and pneumatic tilt 0° - 25° on horIz. plane.
- Top & Bottom Flush Trims with "Quick Change" motors (1.0 HP - 12,000 RPM motors), digital readouts for easy setup.
- 2-Motor (0.3 HP - 12,000 RPM motors) Corner rounding unit for trimming leading & trailing upper & lower edge/corners with "Fast Position", and can be used as a second Top & Bottom fine trimmer as well.
- Top & bottom Scrapers for 3 mm thick PVC banding, digitals for horiz. adjustments.
- Top & bottom Buffing (0.5 HP - 2,800 RPM motors), units tilt 0° - 30°.
- Top & bottom (2,000 Watt) Hot Air Blowers with temperature adjustment.
- Feed Speed 39 FPM, 3 HP feed drive.
Complete with: - Microprocessor for workstations & feed speed.
- Insulated sound enclosure overall trim stations with triple split dust hood, industrial lights, and viewing windows.
- Extendable side panel support rail, 12 KVA - 240 Hz digital frequency inverters.
NOTE: MACHINE IS NOT OPERATIONAL, The Hot Melt Glue System is not working. The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
|
BIESSE AKRON 245 Edgebander with Corner Rounding
Left-hand material infeed for strips & coiled edge material like PVC, ABS, veneer, and solid wood.
Specifications:
- 0.4 - 8 mm (5/16") Cap. edgebanding thickness, min. panel width 85 mm & min. length 140 mm, panel thickness 10 - 50 mm.
Equipped with: - Adjustable top-pressure beam positioning.
- Automatic strip & coil feed magazine with robust shear type 3 mm PVC guillotine.
- Hot-Melt glue system (12 min. heat up time) with Teflon coated gluepot, digital thermostats with automatic kick-down when machine is in idle mode; 1" dia. glue applicator roller.
- Pressure section with (1) large dia. "non-stick" coated drive roller & (2) chrome plated idle rollers with pneumatic positioning.
Workstations: - Front & Rear End Trims (0.33 HP - 12,000 RPM motors), motors travel on (2) straight slides and pneumatic tilt 0° - 25° on horIz. plane.
- Top & Bottom Flush Trims with "Quick Change" motors (1.0 HP - 12,000 RPM motors), digital readouts for easy setup.
- 2-Motor (0.3 HP - 12,000 RPM motors) Corner rounding unit for trimming leading & trailing upper & lower edge/corners with "Fast Position", and can be used as a second Top & Bottom fine trimmer as well.
- Top & bottom Scrapers for 3 mm thick PVC banding, digitals for horiz. adjustments.
- Top & bottom Buffing (0.5 HP - 2,800 RPM motors), units tilt 0° - 30°.
- Top & bottom (2,000 Watt) Hot Air Blowers with temperature adjustment.
- Feed Speed 39 FPM, 3 HP feed drive.
Complete with: - Microprocessor for workstations & feed speed.
- Insulated sound enclosure overall trim stations with triple split dust hood, industrial lights, and viewing windows.
- Extendable side panel support rail, 12 KVA - 240 Hz digital frequency inverters.
NOTE: MACHINE IS NOT OPERATIONAL, The Hot Melt Glue System is not working. The above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
