SCHUETZ TOOL SS 48 96 H VENEER MEMBRANE PRESS
Equipment Location: POTTSVILLE, AR
| Lot Closes: |
|
(10/16/2024 12:00 AM EST)
|
|
Event:
|
|
Arkansas Wood Doors
|
|
Brand/Model:
|
|
SCHUETZ TOOL "SS 48 96 H"
|
|
Year MFG:
|
|
N/A
|
|
Machine Type:
|
|
VENEER MEMBRANE PRESS
|
|
Serial #:
|
|
|
|
Elect./Voltage:
|
|
220 V, 60 Cy, 3 Ph.
|
|
Location:
|
|
POTTSVILLE, AR
|
|
Value New:
|
|
|
|
Negotiable Price:
|
|
Make an Offer
|
|
Condition:
|
|
Good condition
|
| *Dimensions: | | 0" L x 0" W x 0" H |
| *Weight: | | 0 Lbs (estimate) |
|
Loading:
|
|
Rigger Required
|
|
Comment:
|
|
|
Description:
(view full)
Schuetz Tool Bladder Press
Specifications:
- (2) Shuttle tables, approx. 55” x 106” press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200°F. Can use PVA which would extend cycle time to approx. 15 > 45 minutes depending on the actual glue mix used to achieve 80%+ cure strength. Includes Hydraulic Pump.
SPECIAL NOTE: Fully operational, however, need 4 or 5 heating rods replaced, new rod parts are included for you to install ( don't have the capability to remove them). The current average operational temperature is 150° F.
NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
|
Schuetz Tool Bladder Press
Specifications:
- (2) Shuttle tables, approx. 55” x 106” press capacity. Hot air design with 3mm silicone membrane to press veneer into profile, typical cycle time 3 minutes using proper glue that sets at 200°F. Can use PVA which would extend cycle time to approx. 15 > 45 minutes depending on the actual glue mix used to achieve 80%+ cure strength. Includes Hydraulic Pump.
SPECIAL NOTE: Fully operational, however, need 4 or 5 heating rods replaced, new rod parts are included for you to install ( don't have the capability to remove them). The current average operational temperature is 150° F.
NOTE: Above specs are taken from literature and thought to be accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
