JET OES-80CS EDGE SANDER (OSCILLATING)
Equipment Location: HOUSTON, TX
| Lot Closes: |
|
(1/9/2025 3:25 PM EST)
|
|
Event:
|
|
Greenwood Bay
|
|
Brand/Model:
|
|
JET "OES-80CS"
|
|
Year MFG:
|
|
2015
|
|
Machine Type:
|
|
EDGE SANDER (OSCILLATING)
|
|
Serial #:
|
|
15105343
|
|
Elect./Voltage:
|
|
115/230 V, 60 Cy, 1 Ph.
|
|
Location:
|
|
HOUSTON, TX
|
|
Condition:
|
|
Good condition
|
| *Dimensions: | | 51" L x 26.5" W x 44" H |
| *Weight: | | 275 Lbs (estimate) |
|
Loading:
|
|
Self-Load
|
|
Comment:
|
|
|
|
Buyer Premium:
|
|
15%
|
Description:
(view full)
Horizontal/Vertical Oscillating Edge Sander: 1.5 HP, 6" x 89" Belt Size (In.), 4,000 SFPM Belt SFPM, Corded
Specifications: 1-1/2 HP, Hz60, Amps AC18/9, Belt Size 6" x 89", Belt SFPM 4,000, Table Work Surface 32" x 7", Dust Collection Port Size 4"
Features:
- 4" Dust Port Hooks Up to Your Dust Collection System for Efficient Dust Removal, adjustable outer drum, support table enable contour sanding.
- Cast Iron table moves up or down to provide exact workpiece positioning, Graphite-covered Platen runs cooler increasing machine and belt life.
- Oscillating feature reduces heat build-up on the sanding belt, Quick Release Lever and Tracking Control Dial are conveniently located for replacing and tracking belts and tilting Sanding Head for sanding bevels.
NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
|
Horizontal/Vertical Oscillating Edge Sander: 1.5 HP, 6" x 89" Belt Size (In.), 4,000 SFPM Belt SFPM, Corded
Specifications: 1-1/2 HP, Hz60, Amps AC18/9, Belt Size 6" x 89", Belt SFPM 4,000, Table Work Surface 32" x 7", Dust Collection Port Size 4"
Features:
- 4" Dust Port Hooks Up to Your Dust Collection System for Efficient Dust Removal, adjustable outer drum, support table enable contour sanding.
- Cast Iron table moves up or down to provide exact workpiece positioning, Graphite-covered Platen runs cooler increasing machine and belt life.
- Oscillating feature reduces heat build-up on the sanding belt, Quick Release Lever and Tracking Control Dial are conveniently located for replacing and tracking belts and tilting Sanding Head for sanding bevels.
NOTE: The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.
