Description:
(view full)
Edgebander, with Pre-Milling & Corner Rounding – 633 Hrs. Only!
- 0.4 - 15 mm (0.02" - 0.59") Edgebanding thickness, 3 mm (0.12") Maximum coil thickness, 15 mm (0.59") Maximum strip thickness
- 55 mm (2.17") Edgebanding height
- 6 - 50 mm (0.24" - 1.97") Panel thickness, 60 mm (2.36") Minimum panel width, 180 mm (7.09") Minimum panel length
- 35-1/2" Feed chain height, 18 MPM (59 FPM) Feed speed, 14" Outboard support adjustment
- "1961" Pre-milling unit, with (2) 2 kW (2-3/4 HP) - 12,000 RPM - 200 Hz Motors, with Up & down cutting modes, & 5 mm (0.20") Plunge travel
- 820 mm (32.28") Diameter Coil table
- "1903" Automatic edge magazine, For solid edges, strips, & coiled material, with 40 mm (1.57") Maximum loading capacity
- "1906" Cartridge-type gluing application system, For EVA & PUR glue, with 3-1/2 Minimum Heat-up time, Automatic recharge, 4-Cartridge Magazine capacity
- Pressure section, with (1) Large driven roll & (2) Small idler rolls, All rolls with Pneumatic individual control via PLC
- Microprocessor PLC Control, with 5" LCD Display, Touchpad, PLC for edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, & buffing, & Manual operation without a program
- Sound enclosure
WORKSTATIONS:
- "1918" Front & rear end trim unit, with (2) 0.35 kW (1/2 HP) - 9,000 RPM - 300 Hz Motors & 0° - 10° Horizontal & Vertical tilt
- "1823" Top & bottom flush trim unit, with (2) 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motors
- "1824" Multifunctional trim unit (flush trim/radius/chamfer), with (2) 0.35 kW (1/2 HP) - 9,000 RPM - 300 Hz Motors, 5 mm (0.20") Maximum radii & flush trim, & 5 mm (0.20") x 45° Maximum chamfer
- "1929" Top & bottom PVC profile scrape unit, with Reversible insert carbide knives & 3 mm (0.12") Maximum radii
- "1983" Single-motor profile trim (corner rounding) unit, with 0.6 kW (3/4 HP) - 18,000 RPM - 300 Hz Motor
- "1964" Pneumatically-controlled Top & bottom glue scrape unit
- "1944" Top & bottom buffing unit, with (2) 0.20 kW (1/4 HP) 1,670 RPM Motors & 45° Swivel
- Dimensions of this specific machine with outboard support extended: 252" x 63" x 70" H.
|
